3M™ Double Coated Tapes
3M™ Double-Coated Tapes provide easy-handling
3M™ Double-Coated Tapes deliver the flexibility and easy-handling properties of an adhesive transfer tape with the stability and die-cutting capability of a double-coated tape.
3M™ Double coated tapes offer a winning combination of performance and productivity.
Features and benefits:
- Thin, non-woven carrier provides outstanding flexibility
- Ideal choice for gasket and foam attachment
- Get into corners and around curves unlike polyester-carrier tape
- Structural support and precision die-cutting for general purpose applications
- High-strength acrylic adhesive delivers exceptional adhesion
- Use on stainless steel, rubber, polycarbonate, felt, open-cell foams, non-woven fabric parts
- Double-Coated Tapes deliver the flexibility of an adhesive transfer tape with the stability of a double-coated tape
| 3M™ Double-Coated Tape Product Number |
Faceside* Adhesive Type/Thickness |
Carrier Type/Thickness | Backside** Adhesive Type/Thickness |
Liner Color, Type, Print | Liner Caliper |
Total Tape Thickness (w/o liner) |
|---|---|---|---|---|---|---|
|
9009
|
300/0.0008"
(0.020mm) |
Clear PET† 0.0005" (0.013mm)
|
300/0.0008"
(0.020mm) |
White, 55#, Densified Kraft, No print |
0.003"
(0.076mm) |
0.0021"
(0.05mm) |
|
9019
|
300/0.0003"
(0.0084mm) |
Clear PET† 0.0005" (0.013mm)
|
300/0.0003"
(0.0084mm) |
White, 55#, Densified Kraft, No print |
0.003"
(0.076mm) |
0.0011"
(0.03mm) |
|
9492MP
|
200MP/0.001"
(0.025mm) |
Clear PET† 0.0005" (0.013mm)
|
200MP/0.001"
(0.025mm) |
Tan, 58#, Polycoated Kraft, "3M 200MP" |
0.004"
(0.10mm) |
0.0025"
(0.06mm) |
|
9609
|
300/0.0035"
(0.0089mm) |
Clear PET† 0.002" (0.051mm)
|
300MP/0.0035"
(0.089mm) |
Tan, 83#, Polycoated Kraft, no print |
0.0062"
(0.16mm) |
0.16"
(0.23mm) |
|
9690
|
300/0.0028"
(0.0071mm) |
Clear PET† 0.0005" (0.013mm)
|
300MP/0.0023"
(0.0058mm) |
Tan, 83#, Polycoated Kraft, "3M" |
0.0062"
(0.16mm) |
0.0055"
(0.14mm) |
|
9690B
|
300/0.0028"
(0.0071mm) |
Clear PET† 0.0005" (0.013mm)
|
300MP/0.0023"
(0.0058mm) |
Clear PET, no print |
0.002"
(0.051mm) |
0.0055"
(0.14mm) |
|
9731
|
350/0.0016"
(0.041mm) |
Clear PET 0.001" (0.025mm)
|
Silicone Adhesive/
0.0029" (0.07mm) |
Faceside liner - Tan, Polycoated Kraft, no print Backside liner - Fluoropolymer non-silicone clear, PET |
0.005"
(0.13mm)/ 0.0029" (0.07mm) |
0.0055"
(0.14mm) |
|
9795
|
420/0.0028"
(0.071mm) |
PET† 0.0005" (0.013mm)
|
420/0.0023"
(0.058mm) |
Tan, 83# Polycoated Kraft, "3M" |
0.0065"
(0.017mm) |
0.0056"
(0.14mm) |
|
9795B
|
420/0.0028"
(0.071mm) |
Black PET† 0.0005" (0.013mm)
|
420/0.0023"
(0.058mm) |
Tan, 83# Polycoated Kraft, "3M" |
0.0065"
(0.017mm) |
0.0056"
(0.14mm) |
|
9799
|
420/0.0035"
(0.089mm) |
PET† 0.002" (0.05mm)
|
420/0.0035"
(0.089mm) |
Tan, 83# Polycoated Kraft, "3M" |
0.0065"
(0.017mm) |
0.009"
(0.23mm) |
|
55106
|
573/0.001"
(0.025mm) |
Polyester/ 0.001" (0.025mm)
|
573/0.001"
(0.025mm) |
Non-Silicone, Fluorochemical, (polyester film), No print |
0.002"
(0.051mm) |
0.003"
(0.076mm) |
* Faceside adhesive is on the interior of the roll, exposed when unwound. The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.
** Backside adhesive is on the exterior of the roll, exposed when liner is removed. The caliper listed is based on a calculation from manufacturing controlled adhesive coat weights using a density of 1.012 g/cc.
†PET (Polyester).
200MP - High Performance Acrylic for up to 400 degrees F with short-term heat resistance & excellent solvent resistance.
300 - High Strength Acrylic for up to 250 degrees F, with short-term heat resistance. High initial adhesion especially to low surface energy plastics.
300LSE - High Strength Acrylic for up to 300 degrees F, with short-term heat resistance.
- Outstanding adhesion to low surface energy plastics, powder coated paints, and lightly oiled metals.
300MP High Tack Acrylic for up to 250 degrees F, adding short-term heat resistance for automotive interior applications.
- Designed especially to bond most plastics and foams. Economical attachment of graphics.
330 High Temperature Acrylic, for up to 350 degrees F, with short-term heat resistance. Medium firm adhesive features quick stick and excellent heat resistance.
340 High Strength Acrylic - for up to 180 degrees F short-term heat resistance. Excellent bonding to foam and other substrates. High tack; medium shear.
